Rear Door Van Ramp for Scooters and Wheelchairs by PVI

The Rear Door Van Ramp by PVI saves you the cost and headaches of van alterations and conversions. This vehicle ramp provides a simple solution for wheelchairs and scooter's easy entry and exit from your vehicle.

The Rear Door Van Ramp is spring assisted making manual operation even just by a single person a breeze. This vehicle ramp has a high-traction, anti-slip surface that ensures enhanced safety. The Rear Door Van Ramp folds compactly into three sections to be stored vertically in the van.

The Rear Door Van Ramp is made in the USA and comes with a lifetime warranty so you can get the best value out of your new vehicle ramp!

Lifetime Warranty	Made in the USA
Lowest Price Guarantee	30-day Return Policy

Features

• Limited Lifetime Warranty
• Easy Installation (Note: Conversion kit is required if the rear door opening contains a threshold.)
• Mounts to Floor of Van Inside Doorway
• Three Sections, Manually Operated with Spring Assist
• Easily Operated by One Person
• Stores Vertically Inside Doorway
• Durable Welded Construction
• Anti-Slip, High Traction Surface
• Accommodates Wheelchairs and Scooters with Various Wheel Configurations
• This Ramp Has Been Tested at a 3X Safety Factor

Why We Like It

• Easy operation by a single user due to its spring assist feature.
• Enhanced safety due to its high traction, anti-slip surface.
• 27" width accommodating most mobility devices.
• Folds into 3 sections that fit vertically into the back of the van,

Specifications

Ramp Length Calculator

Not sure how much ramp length you should order? Use this calculator to find out.

FAQ's

• What is PVI ramps' rated capacity? - Most of our ramps have a 600 lb. rated capacity. Our bariatric models have an 800 lb. rated capacity. PVI Products are tested to a 3X safety factor making them pound for pound, the strongest, and lightest ramps available.

• What does ADA require for the slope ratio? -  The least possible slope shall be used for any ramp. The maximum slope of a ramp in new construction shall be 1:12. For additional information on ADA requirements please visit our Ramps Selection Guide.

• Can we use a ramp to load a person in the vehicle? -  Yes, providing all of the following criteria are met. 1. Since the wheelchair is occupied, Prairie View Industries recommends never exceeding a 2:12 slope ratio (for every 2 inches of rising a foot of ramp will be required). 2. Always make sure a qualified assistant is present when using any portable ramp. 3. Make certain there is adequate head clearance before entering the van. 4. If using a side door entry, make sure there is a minimum of 30" side to side clearance to accommodate the portable ramp.

• What are your ramps made of?  - PVI uses 6005-T5 and 6063-T5 grade aluminum in our ramping. The portable ramps walking surface is covered with a very high grade/high tack rated adhesive-backed non-slip tape. Once applied, it is very difficult to remove. All hardware is zinc plated.

• What is the yellow level on the side of the ramp? - That is PVI's visual aid. It is attached to all of the Multifold and Utility Ramps. It is designed for safety as it indicates if the ramp is on a safe slope prior to use.

Brochure and Warranty 

 Brochure

 Warranty